Conference Room SAD

[Thread display] [Reply] [New arrival display] [Word search] [Notes] [管理用]

No.	： 146
Title	： SAD Update V1.0.10.11k6r-pre 6D optics
Date	： 2016/11/02(Wed) 17:45:26
Name	： K. Oide
URL	：

Dear Users,

1. The next version will be able to calculate a full-6D optics parameters by EMIT/Emittance[] with the flag CODPLOT:

New functions: AZ, BZ, NZ, ZX, ZPX, ZY, ZPY

- These are compatible with Extended Twiss Parameters, printed by EMIT.
- ZX and ZY have no dimension. ZPX and ZPY are in 1/m.
- So far limited with a periodic condition. Not usable for a transport line yet.
- Thus usable with RADCOD, RADTAPER, etc.
- If x-z or y-z coupling are too strong, the calculation will fail.
- These functions are accessible by Twiss, DISP Z, OpticsPlot, DRAW.
- As CALC and GO are still in 4D, they clears the results by EMIT/Emittance[].
- No direct matching is possible yet. Use FitFunction with Emittance[], in such a way as FitFunction:=(Emittance;Twiss["BZ","$$$"]=20).
- TransferMatrix or the MAT coomand does not support 6D yet.

As this change might affects parts, please be careful.

2. A bug related to a keyword which ahas an alias, such as ROTATE of MULT, has been fixed (already in 1.0.10.10.4k64).

- Related List tree (Click ▼ to display all articles in a thread.）

▼

SAD Update V1.0.10.11k6r-pre 6D optics

K. Oide

No.146

SAD Update. 1.0.10.11k64-pre1 SetCoupledElements - K. Oide 16/11/03-01:43 No.147
Re: SAD Update V1.0.10.11k64-pre2 6D optics for CALC & GO - K. Oide 16/11/21-18:11 No.149
SAD Update V1.0.10.11k64-pre3 6D optics for linac, MAT & TransferMatrix - K. Oide 16/11/28-16:42 No.150

- Reply Form (Reply to the above using the following.)

Name
E-Mail
Subject
Message
> Dear Users, > > 1. The next version will be able to calculate a full-6D optics parameters by EMIT/Emittance[] with the flag CODPLOT: > > New functions: AZ, BZ, NZ, ZX, ZPX, ZY, ZPY > > - These are compatible with Extended Twiss Parameters, printed by EMIT. > - ZX and ZY have no dimension. ZPX and ZPY are in 1/m. > - So far limited with a periodic condition. Not usable for a transport line yet. > - Thus usable with RADCOD, RADTAPER, etc. > - If x-z or y-z coupling are too strong, the calculation will fail. > - These functions are accessible by Twiss, DISP Z, OpticsPlot, DRAW. > - As CALC and GO are still in 4D, they clears the results by EMIT/Emittance[]. > - No direct matching is possible yet. Use FitFunction with Emittance[], in such a way as FitFunction:=(Emittance;Twiss["BZ","$$$"]=20). > - TransferMatrix or the MAT coomand does not support 6D yet. > > As this change might affects parts, please be careful. > > 2. A bug related to a keyword which ahas an alias, such as ROTATE of MULT, has been fixed (already in 1.0.10.10.4k64).
URL
Password (alphanumeric characters within 8)
Subscribe Key (Enter the number of the right image)

- WebForum -

Name
E-Mail
Subject
Message > Dear Users, > > 1. The next version will be able to calculate a full-6D optics parameters by EMIT/Emittance[] with the flag CODPLOT: > > New functions: AZ, BZ, NZ, ZX, ZPX, ZY, ZPY > > - These are compatible with Extended Twiss Parameters, printed by EMIT. > - ZX and ZY have no dimension. ZPX and ZPY are in 1/m. > - So far limited with a periodic condition. Not usable for a transport line yet. > - Thus usable with RADCOD, RADTAPER, etc. > - If x-z or y-z coupling are too strong, the calculation will fail. > - These functions are accessible by Twiss, DISP Z, OpticsPlot, DRAW. > - As CALC and GO are still in 4D, they clears the results by EMIT/Emittance[]. > - No direct matching is possible yet. Use FitFunction with Emittance[], in such a way as FitFunction:=(Emittance;Twiss["BZ","$$$"]=20). > - TransferMatrix or the MAT coomand does not support 6D yet. > > As this change might affects parts, please be careful. > > 2. A bug related to a keyword which ahas an alias, such as ROTATE of MULT, has been fixed (already in 1.0.10.10.4k64).
URL
Password	(alphanumeric characters within 8)
Subscribe Key	(Enter the number of the right image)